Motorcycle Cover Finished

This turned out to be a major challenge, mainly due to the weight of all the tarp once the pieces got sewn together. I had to plan every seam.  I put extra tables in place to support the tarps as I sewed. At times the entire piece rested on my left shoulder as I sewed. I used clothespins to hold the segments together. Alas, I don't have any pictures of the construction process, as they were all deleted by a family member to celebrate a new camera.

The cover itself was not an exact match, as I didn't have a picture of the cruiser bike. The back of the seat is a little more forward than I envisioned. Nevertheless, the basic measurements my wonderful client supplied were just right, and the cover fit the bike!

I also put a drawstring in the bottom seam, but I think that the tarp is a bit too thick to tighten with a draw string.

I also lined the tarp with flannel sheeting, glued in place with Vynabond. The flannel lining is so that it does not scratch the bike. If I were to do it again I'd only put flannel in places where the tarp touched the bike.


I was also scared the whole way through! However, I knew enough about drafting patterns and working the material to know that I could accomplish it. I just hadn't implemented it. It was a good mental exercise to fight those fears and get the job done.

By serendipity, the word "Winter" is visible on the side of the motorcycle cover. Bonus!

Say, if you have read this far and enjoy this blog, would you do me the favour of posting a comment? It gets quite lonely in blogger land if one thinks no one is reading. A comment is good to keep one interested in the topic and eager to continue. Thanks.